Free shipping on all orders over $50
7-15 days international
28 people viewing this product right now!
30-day free returns
Secure checkout
16890308
3M Accuspray Spray Gun System with PPS 2. 0 is a convenient all-in-one solution for measuring, mixing, filtering and spraying paint materials. The system features the Accuspray HVLP Spray Gun, a lightweight composite spray gun body molded in one piece, eliminating the complexity, wear and cleaning of small parts and components. This Accuspray gun works with PPS 2. 0 paint cups and disposable lids, liners and nozzles. PPS 2. 0 features improvements like a quarter-turn locking collar with each lid, domed lid design for better spray performance and wider lid fluid spout. Each paint cup has convenient printed-on universal mix ratios for accurate mixing and a clear access window for easy visibility. Atomizing heads can be used 5 to 10 times, then removed and replaced, giving you the performance of a new gun on demand and at a fraction of the cost. Unlike conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint. And with a fresh lid and liner for each mix, there’s less risk of outside contamination. You can also increase productivity in prep and cleanup time by as much as 50% and use up to 70% less cleaning solvent over conventional paint cup systems. All-inclusive kit includes 1 Accuspray spray gun, 5 nozzles (1. 2 mm, 1. 3 mm, 1. 4 mm, 1. 8 mm, 2. 0 mm), 1 plastic paint cup, 5 disposable lids with locking collar (4 with 200-micron filter, 1 with 125-micron filter), 5 disposable liners and 3 sealing plugs. Air compressor and hose coupler not included.
ONE GUN FOR ALL PAINT SPRAY NEEDS – 3M Accuspray handheld HVLP paint gun works with PPS 2. 0 disposable lids, liners and nozzles to measure, mix, filter and spray a variety of paint materials
ALL-INCLUSIVE PAINT SPRAY KIT – Includes 1 AccuPark spray gun, 5 nozzles (1. 2 mm, 1. 3 mm, 1. 4 mm, 1. 8 mm, 2. 0 mm), 1 plastic paint cup, 5 disposable lids with integrated locking collar (4 with 200-micron filter, 1 with 125-micron filter), 5 disposable liners and 3 sealing plugs. Air compressor and hose coupler not included
IMPROVED LID DESIGN – PPS 2. 0 lids feature an integrated quarter-turn locking collar, which helps eliminate cross-threading and paint buildup, as well as a new domed shape that holds up to 3 ounces of material below the filter, reducing sputter and improving spray performance
REUSABLE PAINT CUP – PPS 2. 0 reusable hard plastic paint cup features printed-on universal mixing ratios and a clear access window so you can easily see the paint and remove the lid and liner
VARIETY OF MATERIALS – The different nozzle options allow you to spray paints, stains, varnishes, basecoats, undercoats, primers, sealers, clear coats, gelcoats, spray able adhesives and more
LIKE-NEW PERFORMANCE AGAIN AND AGAIN – With replaceable atomizing heads, you get the performance of a brand-new gun each time you replace the nozzle
360 DEGREE PAINT RANGE – When used with included PPS 2. 0 cup system, you can consistently spray at any angle, even upside down
LESS WASTE, MORE EFFICIENCY – Less paint waste, mess and contamination than traditional methods. Use up to 70% less cleaning solvent, and shorten prep and cleanup time by as much as 50% compared with conventional metal paint cup systems
For industrial/occupational use only. Not for consumer sale or use.
I’m not a professional auto painter but have been painting my own vehicles for years as a hobby. The spray gun I used was a 30+ year old craftsman siphon type. It was time to look for one a little newer and decided on this one. Experience has taught me that 3M products are as good as any on the market. But I must say that the selling point for me was the easy setup and clean up this gun allows. The fun for me is spraying the paint, not the clean up of the spray gun. The cost of the disposable pieces are more than offset by the savings in paint, primer, and cleaning solvents. Everything about it is straight forward and easy to use just read the instructions with the spray gun and related parts close by. An unexpected plus while painting is the weight of the assembled unit. Much lighter than my old one. The air pressure gauge is easy to adjust and read while in the booth. But the end result is what matters most, and the accusprayer delivers a fine finished product! No complaints. Far better than my old sprayer and it exceeded my expectations.One major caution - do not buy from ProVision paint supply. They are the worst seller I’ve dealt with on Amazon. Terrible, Terrible!This paint system is sold cheaper through Amazon than at the local SW auto paints store and is an authentic 3M systemWhen I received the package it was apparent that it had been previously opened. This wasn't a problem until I discovered that it had been used, there was gray paint on the handle and the first 1/2 inch of the needle. The next one I received was new and worked quite well. I like the ability to store unused paint in the removable containers with a minimal amount of air after it is sealed.The 3M AccuSpray system is a brilliant concept. I love it ! The problem is that the replaceable tips do not fit the handle well. I can get one side to "click" with a bit of finagling, the other side refuses to properly latch no matter what I do. This is true of all of the plastic tips included in the kit, and also the box of extra 1.3mm tips that I ordered.It is totally unacceptable - and truly disappointing.Unfortunately, I ordered this gun 2 months ago, and just now got ready to paint. So its beyond the 30 day return period (my bad). So I have found that if I use a large rubber band as shown in the photo, the tips seem to stay in place OK. I called 3M, and got quick dialog and the phone number of a local 3M rep to assist me. He does not return my calls ... sigh.I advise 3M to do a tolerance stack on the design, and release a new PPS 3.0 Version which says "New! Improved! Now with Posi-Lock Nozzles that actually CLICK!"Just really dog gone disappointed in the nozzle fit everyone. Other than that, a great concept. I encourage you to buy one, BUT once you get it, VERIFY that the nozzles "click fit" as advertised. If they don't, send the gun back! If 3M gets enough of these crummy fit guns back, they may even change the design to address the issue!This is 3M accuspray 2.0 home use. Works well, sprays great. Very low cleanup cost. Spraying down primer works well. Not no high-end gun but definitely great for what I do. As stated in other reviews, it will not produce the output and work a high-end gun will. However it will still put in work. It is an air hog if this is a concern. This 1.0 cups will not work nor tips eventhough the tips will work. If you have 1.0 cups and tips, you can still use this gun with those.First of all....WOW!!! This spray gun is amazing!! It sprays so nicely it blew my mind. Such an awesome system too with the disposable lids and liners what an amazing product. One thing to be mindful of is it does call for 13cfm @20 psi but I will tell you my 5hp 20 gallon compressor that is rated for 8cfm @ 40psi had no problem running this gun so make sure you have enough air before buying and being disappointed. I can say enough good things about this spray gun!!!I have used a parade of spray equipment over the years. 3M does an excellent job with this system. Very user friendly and the disposable components make clean up quick and Free of the usual solvent bath.Recus en pièces détachées plein de poussière dans une boite réembaler j’aurais aimer recevoir dans l’emballage original.Sa semble etre en restant d’inventaire ou provenir d’un centre de liquidation de centre de distribution mais tout les pieces semble être dans la boite. Vérifier votre contenu avant tout!Gun works well, heads do pop off from time to time which is a pain. The worst part is getting the exact pressure. The included gauge was defective it was either full on or completely off. The new one seems a little better but still hard to maintain the exact pressure. it always seems to be around 26-30.I think it is good for a hobbyistI would use it all day for all primers and sealersIt does a 75% job on base -clearcoatThe concept for this gun is great but theres major flaws worked good first couple uses but now the tips pop off while painting. Made of cheap plastic Will end up throwing this out after a few usesAdvertised as low pressure but needs at least 1300psi according to 3M technician i talked to. Gun leaked paint and did not perform at all well. We returned for refund