TCP Global Gravity Feed Sand Blaster Gun Kit - Pneumatic Hand Held Sandblasting Spray Gun with 2 Ceramic Nozzle Tips & Air Regulator - Works with Abrasive Media, Soda, Bead, Walnut & Aluminum Oxide - Ideal for Rust Removal, Surface Cleaning & Paint Prep in Automotive, Metal & Woodworking Projects

Light and easy to maneuver around the work peaceI've read some of the negative reviews and had no such problems with the one that was delivered to me. It works well for small areas and especially seams where you can't get any other tool into. *Carefully read the instructions and warnings.*Arrived on time and works wonders for sodablasting small partsGreat for small jobsIt was easy to setup and fill, seems to use a lot of media. Works pretty good for small jobs and light blasting. Light rust and paint come off fairly easily. Heavy pitted rust and old thick paint take some time and more media but it does work, just time consuming. If you can recover the used media that would be a plus, but that's a whole other project. Glasses and a face shield are a must because the stuff goes everywhere without a cabinet and stings when it hits your face, use proper PPE! Simple small sand blaster, it is what it is and for the price it works fine for me.Es sencillo de usarLight weight and easy to load , used on small outside walnut shell grit blasting project worked as neededI purchased it to strip a 1911 I'm refinishing. Besides the media flow valve being a bit finicky, it performs very well and doesn't chew through a ton of material. The air pressure control fit unlike a lot of comments that said it didn't. Although I'm not sure how accurate it is.First off; I have never used a sand blaster before. I bought this to clean carbon and stains off the exterior of aluminum small engine cylinders. I bought a box of #10 (very fine) glass beads to try with this blaster. I have a 25 gallon compressor and it had no problem supplying enough air for this small task. I must say, this blaster and the #10 glass beads worked excellent. It didn't damage the cylinder, but cleaned it very quickly to like-new condition. And I only used about 1/2 of the hopper to do 1 cylinder. The blaster itself was easy to assemble. The regulator attached with no issues, and I attached a standard air fitting using some teflon tape to the regulator - also with no issues. I found I only needed to turn the hopper valve on half way to supply enough blast media to do the job. I also found that the fine glass beads with drain out of the hopper just by gravity if the hopper valve is fully opened. As for PPE - I wore an N95 mask, safety glasses and a full face shield. That seemed to be adequate for the job I was doing. I did the blasting in the front lawn as I didn't want that fine blast media anywhere near the house. I used so little that there was no trace of it on the lawn when I was finished. For my purposes, this blaster gun is excellent and I highly recommend it for occasional cleaning of small parts.Shutoff value still leaks. Nearly all plastic construction. Nozzles are replaceable ceramic, however they are a non-standard size so good luck finding them anywhere other than amazon. Single size diameter for nozzles makes it impractical for many media's.Très utile pour enlever la rouille sur les pièces automobiles et Très efficace.Buse brise dans le transport et pour un remboursment ou remplacement faut je le retourneQuick delivery, exactly what I ordered